Shijiazhuang Gaide Machinery Co., Ltd.

Product List


Contact Us

Contact Us
Add: HEBEI PROVICE ,PRC
Tel: +86-311-67698881
Fax: +86-311-67698881
E-mail: gaide@gaidepharm.com

High containment negative pressure isolatorLocation:Home >>High containment negative pressure isolator

  

  

Product presentation:

Pressure design: the isolator will be designed as below.

Design pressure of the isolator: -500Pa

Operating pressure of the working chamber: -75 to -100Pa, which can be adjusted during the commissioning period.

Pressure inside the buffer chamber is -50 to -100Pa, which can be adjusted during the commissioning period.

Material of construction:

The working chamber is made of 316L stainless steel with a thickness of 4mm; the access panel/inspection area is made of 304 stainless steel with a thickness of 1.5mm; the supporting part is made of 304 stainless steel square tubes.

All corners inside the isolator adopt arc transition with a radius of R20 to guarantee no materials accumulation and it is convenient to clean.

Product characteristics:

The enclosure space is formed by stainless steel panel and reinforced plexiglass. Certain negative pressure will be formed inside the chamber by use of the induced air from induced draft fan, so that the dust inside the chamber will not disperse into the ambient environment; the isolator chamber is designed under negative pressure to guarantee the safety of operators and no contamination of the ambient environment.

The isolator is used for the protection of operating environment in synthesis workshop and extraction workshop in the following operation procedures: powder loading, transfer of moist powders from suction filter, powder packaging and powder crushing after drying, weighing, and capping. The isolator is also used for protecting the operators during manual washing.

The isolator is used to provide OEB5 containment level for protection.